Чеклист про безопасность Linux

Форум Сообщества Практиков Конкурентной разведки (СПКР)

Конкурентная разведка, Бизнес-разведка, Корпоративная разведка,
Деловая разведка по открытым источникам в бизнесе.
Работаем строго в рамках закона.

Дезинформация и активные мероприятия в бизнесе
Форум Сообщества Практиков Конкурентной разведки (СПКР) »   Безопасность рабочего места »   Чеклист про безопасность Linux

Чеклист про безопасность Linux

<<Назад  Вперед>>Печать

Всего сообщений: 2710
Рейтинг пользователя: 22


Дата регистрации на форуме:
5 июня 2009


Linux workstation security checklist

This is a set of recommendations used by the Linux Foundation for their systems
administrators. All of LF employees are remote workers and we use this set of
guidelines to ensure that a sysadmin's system passes core security requirements
in order to reduce the risk of it becoming an attack vector against the rest
of our infrastructure.

Even if your systems administrators are not remote workers, chances are that
they perform a lot of their work either from a portable laptop in a work
environment, or set up their home systems to access the work infrastructure
for after-hours/emergency support. In either case, you can adapt this set of
recommendations to suit your environment.

This, by no means, is an exhaustive "workstation hardening" document, but
rather an attempt at a set of baseline recommendations to avoid most glaring
security errors without introducing too much inconvenience. You may read this
document and think it is way too paranoid, while someone else may think this
barely scratches the surface. Security is just like driving on the highway --
anyone going slower than you is an idiot, while anyone driving faster than you
is a crazy person. These guidelines are merely a basic set of core safety
rules that is neither exhaustive, nor a replacement for experience, vigilance,
and common sense.

Each section is split into two areas:

  • The checklist that can be adapted to your project's needs
  • Free-form list of considerations that explain what dictated these decisions

Priority levels

The items in each checklist include the priority level, which we hope will
help guide your decision:

  • (ESSENTIAL) items should definitely be high on the consideration list.
    If not implemented, they will introduce high risks to your workstation
  • (NICE) to have items will improve the overall security, but will
    affect how you interact with your work environment, and probably require
    learning new habits or unlearning old ones.
  • (PARANOID) is reserved for items we feel will significantly improve your
    workstation security, but will require a lot of adjustment to the
    way you interact with your operating system.

Remember, these are only guidelines. If you feel these priority levels do not
reflect your project's commitment to security, you should adjust them as you
see fit.

Choosing the right hardware

We do not mandate that our admins use a specific vendor or a specific model, so
this section addresses core considerations when choosing a work system.


  • System supports SecureBoot (ESSENTIAL)
  • System has no firewire, thunderbolt or ExpressCard ports (NICE)
  • System has a TPM chip (NICE)



Despite its controversial nature, SecureBoot offers prevention against many
attacks targeting workstations (Rootkits, "Evil Maid," etc), without
introducing too much extra hassle. It will not stop a truly dedicated attacker,
plus there is a pretty high degree of certainty that state security agencies
have ways to defeat it (probably by design), but having SecureBoot is better
than having nothing at all.

Alternatively, you may set up Anti Evil Maid which offers a more
wholesome protection against the type of attacks that SecureBoot is supposed
to prevent, but it will require more effort to set up and maintain.

Firewire, thunderbolt, and ExpressCard ports

Firewire is a standard that, by design, allows any connecting device full
direct memory access to your system (see Wikipedia). Thunderbolt and
ExpressCard are guilty of the same, though some later implementations of
Thunderbolt attempt to limit the scope of memory access. It is best if the
system you are getting has none of these ports, but it is not critical, as
they usually can be turned off via UEFI or disabled in the kernel itself.

TPM Chip

Trusted Platform Module (TPM) is a crypto chip bundled with the motherboard
separately from the core processor, which can be used for additional platform
security (such as to store full-disk encryption keys), but is not normally used
for day-to-day workstation operation. At best, this is a nice-to-have, unless
you have a specific need to use TPM for your workstation security.

Pre-boot environment

This is a set of recommendations for your workstation before you even start
with OS installation.


  • UEFI boot mode is used (not legacy BIOS) (ESSENTIAL)
  • Password is required to enter UEFI configuration (ESSENTIAL)
  • SecureBoot is enabled (ESSENTIAL)
  • UEFI-level password is required to boot the system (NICE)


UEFI and SecureBoot

UEFI, with all its warts, offers a lot of goodies that legacy BIOS doesn't,
such as SecureBoot. Most modern systems come with UEFI mode on by default.

Make sure a strong password is required to enter UEFI configuration mode. Pay
attention, as many manufacturers quietly limit the length of the password you
are allowed to use, so you may need to choose high-entropy short passwords vs.
long passphrases (see below for more on passphrases).

Depending on the Linux distribution you decide to use, you may or may not have
to jump through additional hoops in order to import your distribution's
SecureBoot key that would allow you to boot the distro. Many distributions have
partnered with Microsoft to sign their released kernels with a key that is
already recognized by most system manufacturers, therefore saving you the
trouble of having to deal with key importing.

As an extra measure, before someone is allowed to even get to the boot
partition and try some badness there, let's make them enter a password. This
password should be different from your UEFI management password, in order to
prevent shoulder-surfing. If you shut down and start a lot, you may choose to
not bother with this, as you will already have to enter a LUKS passphrase and
this will save you a few extra keystrokes.

Distro choice considerations

Chances are you'll stick with a fairly widely-used distribution such as Fedora,
Ubuntu, Arch, Debian, or one of their close spin-offs. In any case, this is
what you should consider when picking a distribution to use.


  • Has a robust MAC/RBAC implementation (SELinux/AppArmor/GrSecurity) (ESSENTIAL)
  • Publishes security bulletins (ESSENTIAL)
  • Provides timely security patches (ESSENTIAL)
  • Provides cryptographic verification of packages (ESSENTIAL)
  • Fully supports UEFI and SecureBoot (ESSENTIAL)
  • Has robust native full disk encryption support (ESSENTIAL)


SELinux, AppArmor, and GrSecurity/PaX

Mandatory Access Controls (MAC) or Role-Based Access Controls (RBAC) are an
extension of the basic user/group security mechanism used in legacy POSIX
systems. Most distributions these days either already come bundled with a
MAC/RBAC implementation (Fedora, Ubuntu), or provide a mechanism to add it via
an optional post-installation step (Gentoo, Arch, Debian). Obviously, it is
highly advised that you pick a distribution that comes pre-configured with a
MAC/RBAC system, but if you have strong feelings about a distribution that
doesn't have one enabled by default, do plan to configure it

Distributions that do not provide any MAC/RBAC mechanisms should be strongly
avoided, as traditional POSIX user- and group-based security should be
considered insufficient in this day and age. If you would like to start out
with a MAC/RBAC workstation, AppArmor and GrSecurity/PaX are generally
considered easier to learn than SELinux. Furthermore, on a workstation, where
there are few or no externally listening daemons, and where user-run
applications pose the highest risk, GrSecurity/PaX will offer more security
benefits than just SELinux.

Distro security bulletins

Most of the widely used distributions have a mechanism to deliver security
bulletins to their users, but if you are fond of something esoteric, check
whether the developers have a documented mechanism of alerting the users about
security vulnerabilities and patches. Absence of such mechanism is a major
warning sign that the distribution is not mature enough to be considered for a
primary admin workstation.

Timely and trusted security updates

Most of the widely used distributions deliver regular security updates, but is
worth checking to ensure that critical package updates are provided in a
timely fashion. Avoid using spin-offs and "community rebuilds" for this
reason, as they routinely delay security updates due to having to wait for the
upstream distribution to release it first.

You'll be hard-pressed to find a distribution that does not use cryptographic
signatures on packages, updates metadata, or both. That being said, fairly
widely used distributions have been known to go for years before introducing
this basic security measure (Arch, I'm looking at you), so this is a thing
worth checking.

Distros supporting UEFI and SecureBoot

Check that the distribution supports UEFI and SecureBoot. Find out whether it
requires importing an extra key or whether it signs its boot kernels with a key
already trusted by systems manufacturers (e.g. via an agreement with
Microsoft). Some distributions do not support UEFI/SecureBoot but offer
alternatives to ensure tamper-proof or tamper-evident boot environments
(Qubes-OS uses Anti Evil Maid, mentioned earlier). If a distribution
doesn't support SecureBoot and has no mechanisms to prevent boot-level attacks,
look elsewhere.

Full disk encryption

Full disk encryption is a requirement for securing data at rest, and is
supported by most distributions. As an alternative, systems with
self-encrypting hard drives may be used (normally implemented via the on-board
TPM chip) and offer comparable levels of security plus faster operation, but at
a considerably higher cost.

Distro installation guidelines

All distributions are different, but here are general guidelines:


  • Use full disk encryption (LUKS) with a robust passphrase (ESSENTIAL)
  • Make sure swap is also encrypted (ESSENTIAL)
  • Require a password to edit bootloader (can be same as LUKS) (ESSENTIAL)
  • Set up a robust root password (can be same as LUKS) (ESSENTIAL)
  • Use an unprivileged account, part of administrators group (ESSENTIAL)
  • Set up a robust user-account password, different from root (ESSENTIAL)


Full disk encryption

Unless you are using self-encrypting hard drives, it is important to configure
your installer to fully encrypt all the disks that will be used for storing
your data and your system files. It is not sufficient to simply encrypt the
user directory via auto-mounting cryptfs loop files (I'm looking at you, older
versions of Ubuntu), as this offers no protection for system binaries or swap,
which is likely to contain a slew of sensitive data. The recommended
encryption strategy is to encrypt the LVM device, so only one passphrase is
required during the boot process.

The /boot partition will usually remain unencrypted, as the bootloader needs
to be able to boot the kernel itself before invoking LUKS/dm-crypt. Some
distributions support encrypting the /boot partition as well (e.g.
Arch), and it is possible to do the same on other distros, but likely at
the cost of complicating system updates. It is not critical to encrypt
/boot if your distro of choice does not natively support it, as the kernel
image itself leaks no private data and will be protected against tampering
with a cryptographic signature checked by SecureBoot.

Choosing good passphrases

Modern Linux systems have no limitation of password/passphrase length, so the
only real limitation is your level of paranoia and your stubbornness. If you
boot your system a lot, you will probably have to type at least two different
passwords: one to unlock LUKS, and another one to log in, so having long
passphrases will probably get old really fast. Pick passphrases that are 2-3
words long, easy to type, and preferably from rich/mixed vocabularies.

Examples of good passphrases (yes, you can use spaces):

  • nature abhors roombas
  • 12 in-flight Jebediahs
  • perdon, tengo flatulence

Weak passphrases are combinations of words you're likely to see in published
works or anywhere else in real life, such as:

  • Mary had a little lamb
  • you're a wizard, Harry
  • to infinity and beyond

You can also stick with non-vocabulary passwords that are at least 10-12
characters long, if you prefer that to typing passphrases.

Unless you have concerns about physical security, it is fine to write down your
passphrases and keep them in a safe place away from your work desk.

Root, user passwords and the admin group

We recommend that you use the same passphrase for your root password as you
use for your LUKS encryption (unless you share your laptop with other trusted
people who should be able to unlock the drives, but shouldn't be able to
become root). If you are the sole user of the laptop, then having your root
password be different from your LUKS password has no meaningful security
advantages. Generally, you can use the same passphrase for your UEFI
administration, disk encryption, and root account — knowing any of these will
give an attacker full control of your system anyway, so there is little
security benefit to have them be different on a single-user workstation.

You should have a different, but equally strong password for your regular user
account that you will be using for day-to-day tasks. This user should be member
of the admin group (e.g. wheel or similar, depending on the distribution),
allowing you to perform sudo to elevate privileges.

In other words, if you are the sole user on your workstation, you should have 2
distinct, robust, equally strong passphrases you will need to remember:

Admin-level, used in the following locations:

  • UEFI administration
  • Bootloader (GRUB)
  • Disk encryption (LUKS)
  • Workstation admin (root user)

User-level, used for the following:

  • User account and sudo
  • Master password for the password manager

All of them, obviously, can be different if there is a compelling reason.

Post-installation hardening

Post-installation security hardening will depend greatly on your distribution
of choice, so it is futile to provide detailed instructions in a general
document such as this one. However, here are some steps you should take:


  • Globally disable firewire and thunderbolt modules (ESSENTIAL)
  • Check your firewalls to ensure all incoming ports are filtered (ESSENTIAL)
  • Make sure root mail is forwarded to an account you check (ESSENTIAL)
  • Set up an automatic OS update schedule, or update reminders (ESSENTIAL)
  • Check to ensure sshd service is disabled by default (NICE)
  • Configure the screensaver to auto-lock after a period of inactivity (NICE)
  • Set up logwatch (NICE)
  • Install and use rkhunter (NICE)
  • Install an Intrusion Detection System (NICE)


Blacklisting modules

To blacklist a firewire and thunderbolt modules, add the following lines to a
file in /etc/modprobe.d/blacklist-dma.conf:

blacklist firewire-core
blacklist thunderbolt

The modules will be blacklisted upon reboot. It doesn't hurt doing this even if
you don't have these ports (but it doesn't do anything either).

Root mail

By default, root mail is just saved on the system and tends to never be read.
Make sure you set your /etc/aliases to forward root mail to a mailbox that
you actually read, otherwise you may miss important system notifications and

# Person who should get root's mail
root: bob@example.com

Run newaliases after this edit and test it out to make sure that it actually
gets delivered, as some email providers will reject email coming in from
nonexistent or non-routable domain names. If that is the case, you will need to
play with your mail forwarding configuration until this actually works.

Firewalls, sshd, and listening daemons

The default firewall settings will depend on your distribution, but many of
them will allow incoming sshd ports. Unless you have a compelling legitimate
reason to allow incoming ssh, you should filter that out and disable the sshd

systemctl disable sshd.service
systemctl stop sshd.service

You can always start it temporarily if you need to use it.

In general, your system shouldn't have any listening ports apart from
responding to ping. This will help safeguard you against network-level 0-day

Automatic updates or notifications

It is recommended to turn on automatic updates, unless you have a very good
reason not to do so, such as fear that an automatic update would render your
system unusable (it's happened in the past, so this fear is not unfounded). At
the very least, you should enable automatic notifications of available updates.
Most distributions already have this service automatically running for you, so
chances are you don't have to do anything. Consult your distribution
documentation to find out more.

You should apply all outstanding errata as soon as possible, even if something
isn't specifically labeled as "security update" or has an associated CVE code.
All bugs have the potential of being security bugs and erring on the side of
newer, unknown bugs is generally a safer strategy than sticking with old,
known ones.

Watching logs

You should have a keen interest in what happens on your system. For this
reason, you should install logwatch and configure it to send nightly activity
reports of everything that happens on your system. This won't prevent a
dedicated attacker, but is a good safety-net feature to have in place.

Note, that many systemd distros will no longer automatically install a syslog
server that logwatch needs (due to systemd relying on its own journal), so
you will need to install and enable rsyslog to make sure your /var/log is
not empty before logwatch will be of any use.

Rkhunter and IDS

Installing rkhunter and an intrusion detection system (IDS) like aide or
tripwire will not be that useful unless you actually understand how they work
and take the necessary steps to set them up properly (such as, keeping the
databases on external media, running checks from a trusted environment,
remembering to refresh the hash databases after performing system updates and
configuration changes, etc). If you are not willing to take these steps and
adjust how you do things on your own workstation, these tools will introduce
hassle without any tangible security benefit.

We do recommend that you install rkhunter and run it nightly. It's fairly
easy to learn and use, and though it will not deter a sophisticated attacker,
it may help you catch your own mistakes.

Personal workstation backups

Workstation backups tend to be overlooked or done in a haphazard, often unsafe


  • Set up encrypted workstation backups to external storage (ESSENTIAL)
  • Use zero-knowledge backup tools for off-site/cloud backups (NICE)


Full encrypted backups to external storage

It is handy to have an external hard drive where one can dump full backups
without having to worry about such things like bandwidth and upstream speeds
(in this day and age most providers still offer dramatically asymmetric
upload/download speeds). Needless to say, this hard drive needs to be in itself
encrypted (again, via LUKS), or you should use a backup tool that creates
encrypted backups, such as duplicity or its GUI companion, deja-dup. I
recommend using the latter with a good randomly generated passphrase, stored
in a safe offline place. If you travel with your laptop, leave this drive at
home to have something to come back to in case your laptop is lost or stolen.

In addition to your home directory, you should also back up /etc and
/var/log for various forensic purposes.

Above all, avoid copying your home directory onto any unencrypted storage, even
as a quick way to move your files around between systems, as you will most
certainly forget to erase it once you're done, exposing potentially private or
otherwise security sensitive data to snooping hands — especially if you keep
that storage media in the same bag with your laptop.

Selective zero-knowledge backups off-site

Off-site backups are also extremely important and can be done either to your
employer, if they offer space for it, or to a cloud provider. You can set up a
separate duplicity/deja-dup profile to only include most important files in
order to avoid transferring huge amounts of data that you don't really care to
back up off-site (internet cache, music, downloads, etc).

Alternatively, you can use a zero-knowledge backup tool, such as
SpiderOak, which offers an excellent Linux GUI tool and has additional
useful features such as synchronizing content between multiple systems and

Best practices

What follows is a curated list of best practices that we think you should
adopt. It is most certainly non-exhaustive, but rather attempts to offer
practical advice that strikes a workable balance between security and overall


There is no question that the web browser will be the piece of software with
the largest and the most exposed attack surface on your system. It is a tool
written specifically to download and execute untrusted, frequently hostile
code. It attempts to shield you from this danger by employing multiple
mechanisms such as sandboxes and code sanitization, but they have all been
previously defeated on multiple occasions. You should learn to approach
browsing websites as the most insecure activity you'll engage in on any given

There are several ways you can reduce the impact of a compromised browser, but
the truly effective ways will require significant changes in the way you
operate your workstation.

1: Use two different browsers (ESSENTIAL)

This is the easiest to do, but only offers minor security benefits. Not all
browser compromises give an attacker full unfettered access to your system --
sometimes they are limited to allowing one to read local browser storage,
steal active sessions from other tabs, capture input entered into the browser,
etc. Using two different browsers, one for work/high security sites, and
another for everything else will help prevent minor compromises from giving
attackers access to the whole cookie jar. The main inconvenience will be the
amount of memory consumed by two different browser processes.

Here's what we recommend:

Firefox for work and high security sites

Use Firefox to access work-related sites, where extra care should be taken to
ensure that data like cookies, sessions, login information, keystrokes, etc,
should most definitely not fall into attackers' hands. You should NOT use
this browser for accessing any other sites except select few.

You should install the following Firefox add-ons:

  • NoScript (ESSENTIAL)

    • NoScript prevents active content from loading, except from user
      whitelisted domains. It is a great hassle to use with your default browser
      (though offers really good security benefits), so we recommend only
      enabling it on the browser you use to access work-related sites.

  • Privacy Badger (ESSENTIAL)

    • EFF's Privacy Badger will prevent most external trackers and ad platforms
      from being loaded, which will help avoid compromises on these tracking
      sites from affecting your browser (trackers and ad sites are very commonly
      targeted by attackers, as they allow rapid infection of thousands of
      systems worldwide).

  • HTTPS Everywhere (ESSENTIAL)

    • This EFF-developed Add-on will ensure that most of your sites are accessed
      over a secure connection, even if a link you click is using http:// (great
      to avoid a number of attacks, such as SSL-strip).

  • Certificate Patrol (NICE)

    • This tool will alert you if the site you're accessing has recently changed
      their TLS certificates — especially if it wasn't nearing expiration dates
      or if it is now using a different certification authority. It helps
      alert you if someone is trying to man-in-the-middle your connection,
      but generates a lot of benign false-positives.

You should leave Firefox as your default browser for opening links, as
NoScript will prevent most active content from loading or executing.

Chrome/Chromium for everything else

Chromium developers are ahead of Firefox in adding a lot of nice security
features (at least on Linux), such as seccomp sandboxes, kernel user
namespaces, etc, which act as an added layer of isolation between the sites
you visit and the rest of your system. Chromium is the upstream open-source
project, and Chrome is Google's proprietary binary build based on it (insert
the usual paranoid caution about not using it for anything you don't want
Google to know about).

It is recommended that you install Privacy Badger and HTTPS Everywhere
extensions in Chrome as well and give it a distinct theme from Firefox to
indicate that this is your "untrusted sites" browser.

2: Use two different browsers, one inside a dedicated VM (NICE)

This is a similar recommendation to the above, except you will add an extra
step of running the "everything else" browser inside a dedicated VM that you
access via a fast protocol, allowing you to share clipboards and forward sound
events (e.g. Spice or RDP). This will add an excellent layer of isolation
between the untrusted browser and the rest of your work environment, ensuring
that attackers who manage to fully compromise your browser will then have to
additionally break out of the VM isolation layer in order to get to the rest
of your system.

This is a surprisingly workable configuration, but requires a lot of RAM and
fast processors that can handle the increased load. It will also require an
important amount of dedication on the part of the admin who will need to
adjust their work practices accordingly.

3: Fully separate your work and play environments via virtualization (PARANOID)

See Qubes-OS project, which strives to provide a high-security
workstation environment via compartmentalizing your applications into separate
fully isolated VMs.

Password managers


  • Use a password manager (ESSENTIAL)
  • Use unique passwords on unrelated sites (ESSENTIAL)
  • Use a password manager that supports team sharing (NICE)
  • Use a separate password manager for non-website accounts (NICE)


Using good, unique passwords should be a critical requirement for every member
of your team. Credential theft is happening all the time — either via
compromised computers, stolen database dumps, remote site exploits, or any
number of other means. No credentials should ever be reused across sites,
especially for critical applications.

In-browser password manager

Every browser has a mechanism for saving passwords that is fairly secure and
can sync with vendor-maintained cloud storage while keeping the data encrypted
with a user-provided passphrase. However, this mechanism has important

  1. It does not work across browsers
  2. It does not offer any way of sharing credentials with team members

There are several well-supported, free-or-cheap password managers that are
well-integrated into multiple browsers, work across platforms, and offer
group sharing (usually as a paid service). Solutions can be easily found via
search engines.

Standalone password manager

One of the major drawbacks of any password manager that comes integrated with
the browser is the fact that it's part of the application that is most likely
to be attacked by intruders. If this makes you uncomfortable (and it should),
you may choose to have two different password managers — one for websites
that is integrated into your browser, and one that runs as a standalone
application. The latter can be used to store high-risk credentials such as
root passwords, database passwords, other shell account credentials, etc.

It may be particularly useful to have such tool for sharing superuser account
credentials with other members of your team (server root passwords, ILO
passwords, database admin passwords, bootloader passwords, etc).

A few tools can help you:

  • KeePassX, which improves team sharing in version 2
  • Pass, which uses text files and PGP and integrates with git
  • Django-Pstore, which uses GPG to share credentials between admins
  • Hiera-Eyaml, which, if you are already using Puppet for your
    infrastructure, may be a handy way to track your server/service credentials
    as part of your encrypted Hiera data store

Securing SSH and PGP private keys

Personal encryption keys, including SSH and PGP private keys, are going to be
the most prized items on your workstation — something the attackers will be
most interested in obtaining, as that would allow them to further attack your
infrastructure or impersonate you to other admins. You should take extra steps
to ensure that your private keys are well protected against theft.


  • Strong passphrases are used to protect private keys (ESSENTIAL)
  • PGP Master key is stored on removable storage (NICE)
  • Auth, Sign and Encrypt Subkeys are stored on a smartcard device (NICE)
  • SSH is configured to use PGP Auth key as ssh private key (NICE)


The best way to prevent private key theft is to use a smartcard to store your
encryption private keys and never copy them onto the workstation. There are
several manufacturers that offer OpenPGP capable devices:

  • Kernel Concepts, where you can purchase both the OpenPGP compatible
    smartcards and the USB readers, should you need one.
  • Yubikey NEO, which offers OpenPGP smartcard functionality in addition
    to many other cool features (U2F, PIV, HOTP, etc).

It is also important to make sure that the master PGP key is not stored on the
main workstation, and only subkeys are used. The master key will only be
needed when signing someone else's keys or creating new subkeys — operations
which do not happen very frequently. You may follow the Debian's subkeys
guide to learn how to move your master key to removable storage and how to
create subkeys.

You should then configure your gnupg agent to act as ssh agent and use the
smartcard-based PGP Auth key to act as your ssh private key. We publish a
detailed guide on how to do that using either a smartcard reader or a
Yubikey NEO.

If you are not willing to go that far, at least make sure you have a strong
passphrase on both your PGP private key and your SSH private key, which will
make it harder for attackers to steal and use them.

Hibernate or shut down, do not suspend

When a system is suspended, the RAM contents are kept on the memory chips and
can be read by an attacker (known as the Cold Boot Attack). If you are
going away from your system for an extended period of time, such as at the end
of the day, it is best to shut it down or hibernate it instead of suspending
it or leaving it on.

SELinux on the workstation

If you are using a distribution that comes bundled with SELinux (such as
Fedora), here are some recommendation of how to make the best use of it to
maximize your workstation security.


  • Make sure SELinux is enforcing on your workstation (ESSENTIAL)
  • Never blindly run audit2allow -M, always check (ESSENTIAL)
  • Never setenforce 0 (NICE)
  • Switch your account to SELinux user staff_u (NICE)


SELinux is a Mandatory Access Controls (MAC) extension to core POSIX
permissions functionality. It is mature, robust, and has come a long way since
its initial roll-out. Regardless, many sysadmins to this day repeat the
outdated mantra of "just turn it off."

That being said, SELinux will have limited security benefits on the
workstation, as most applications you will be running as a user are going to
be running unconfined. It does provide enough net benefit to warrant leaving
it on, as it will likely help prevent an attacker from escalating privileges
to gain root-level access via a vulnerable daemon service.

Our recommendation is to leave it on and enforcing.

Never setenforce 0

It's tempting to use setenforce 0 to flip SELinux into permissive mode
on a temporary basis, but you should avoid doing that. This essentially turns
off SELinux for the entire system, while what you really want is to
troubleshoot a particular application or daemon.

Instead of setenforce 0 you should be using semanage permissive -a
to put only that domain into permissive mode. First, find out
which domain is causing troubles by running ausearch:

ausearch -ts recent -m avc

and then look for scontext= (source SELinux context) line, like so:


This tells you that the domain being denied is gpg_pinentry_t, so if you
want to troubleshoot the application, you should add it to permissive domains:

semange permissive -a gpg_pinentry_t

This will allow you to use the application and collect the rest of the AVCs,
which you can then use in conjunction with audit2allow to write a local
policy. Once that is done and you see no new AVC denials, you can remove that
domain from permissive by running:

semanage permissive -d gpg_pinentry_t

Use your workstation as SELinux role staff_r

SELinux comes with a native implementation of roles that prohibit or grant
certain privileges based on the role associated with the user account. As an
administrator, you should be using the staff_r role, which will restrict
access to many configuration and other security-sensitive files, unless you
first perform sudo.

By default, accounts are created as unconfined_r and most applications you
execute will run unconfined, without any (or with only very few) SELinux
constraints. To switch your account to the staff_r role, run the following

usermod -Z staff_u [username]

You should log out and log back in to enable the new role, at which point if
you run id -Z, you'll see:


When performing sudo, you should remember to add an extra flag to tell
SELinux to transition to the "sysadmin" role. The command you want is:

sudo -i -r sysadm_r

At which point id -Z will show:


WARNING: you should be comfortable using ausearch and audit2allow
before you make this switch, as it's possible some of your applications will
no longer work when you're running as role staff_r. At the time of writing,
the following popular applications are known to not work under staff_r
without policy tweaks:

  • Chrome/Chromium
  • Skype
  • VirtualBox

To switch back to unconfined_r, run the following command:

usermod -Z unconfined_u [username]

and then log out and back in to get back into the comfort zone.

Further reading

The world of IT security is a rabbit hole with no bottom. If you would like to
go deeper, or find out more about security features on your particular
distribution, please check out the following links:


This work is licensed under a
Creative Commons Attribution-ShareAlike 4.0 International License.


Всего сообщений: 56
Рейтинг пользователя: 0


Дата регистрации на форуме:
4 янв. 2010
Большое спасибо!
<<Назад  Вперед>>Печать
Форум Сообщества Практиков Конкурентной разведки (СПКР) »   Безопасность рабочего места »   Чеклист про безопасность Linux

Последние RSS
Open Source Intelligence (OSINT) Tools and Resources Handbook
Top tips on gathering information about companies by using free online sources
Новое на блоге HRразведка
Безопасность данных в MS Access
Слово как улика
20 Recon and Intel Gathering Tools used by InfoSec Professionals
What’s Changed?
10 альтернативных поисковиков
Ситуационный центр главы Республики Коми
Развёртывание ситуационных центров на базе технологии Avalanche
Как принимать сложные решения. Советы бывшего оперативника ЦРУ.
Открытая информация о "Новичке" из сети интернет.
Ген. директор "ОЗХО" Ахмет Узюмдж о "Новичке" и хим. атаке в Сирии
Онлайн-сервисы для Twitter
Коллекция для Twitter
Приложение Opera VPN закрывается
О работе разведки
Deep web и 11 поисковиков по нему
Об изначальной "лживости" любых документов
Обновление на блоге HRазведка

Самые активные 20 тем RSS
Стандартные источники информации в СайтСпутнике
Слово как улика
Open Source Intelligence (OSINT) Tools and Resources Handbook